VACUUM & INFUSION

VACUUM

In order to optimize the matrix/reinforcement ratio, we are offering a wide range of periphericals for the vacuum section of the composites.

Bleedex

Product Description

The Bleedex is a polyamide layer bonded with polyester. It is used in the implementation of the vacuum process (laminating, bonding of core, and compacting pre pregs).

Its characteristics allow during the implementation of the vacuum process, an excellent drainage over the entire surface of the parts even when its saturated with resin

More Info

Feltrex HD 150

Product Description

The FELTREX HD is a polyester felt made with light filaments, it is used during the implementation of the vacuum process (vacuum laminating, infusion, core laminating, compaction of the pre pregs), it is abundant, wooly and hardly compressible.

Its characteristics will allow, during the implementation of the vacuum process, an excellent drainage / breather over the entire area of the piece/part. Perfectly adapted for vacuum process system of light weight fabrics like glass, carbon…

More Info

Feltrex HD 300

Product Description

The FELTREX HD is a polyester felt made with light filaments, it is used during the implementation of the vacuum process (vacuum laminating, infusion, core laminating, compaction of the pre pregs), it is abundant, wooly and hardly compressible.

Its characteristics will allow, during the implementation of the vacuum process, an excellent drainage / breather over the entire area of the piece/part. Perfectly adapted for vacuum process system of light weight fabrics like glass, carbon…

More Info

Feltrex Lin

Product Description

Flax vacuum drain. Weight 150 gsm Thickness 2,5 mm / Width 75 cm sold in lm sold in roll of 50 lm

More Info

Perforex S2 P31

Product Description

The film « Perforex "S2" » is a perforated release film designed for use in resin infusion processing of advanced composite structure and also vacuum process. The film is hot needle perforated to ensure even resin saturation is achieved throughout the laminate.

It is compatible for use with a wide range of epoxy, polyester and vinylester resin systems. However we recommend small scale trials prior to committing to large infusion mouldings

More Info

Tarpaulin tube PE

Product Description

The Bache Tube is a film for the vacuum process (tubular) made of polyethylene (LDPE). This film has been conceived for vacuum moulding (infusion) for polyester, vinylester and epoxy parts.

The Bache Tube has a good mechanical and chemical resistance. It can be used with vinylester, polyester and epoxy resin.

More Info

Nylex S2 70µ

Product Description

Nylex S2 is a tough, puncture resistant co-extrusion of polyethylene and nylon based resins which is designed for use in production of polyester/vinylester and epoxy resin infused components for the wind energy, marine and general composite industries.

Nylex S2 is particularly interesting due to its limited sensitivity to low humidity levels which are often problematic to predominantly nylon based films as the lack of moisture can reduce flexibility. This ensures consistent year-long performance in all workshop environments.

More Info

Peeltex Rouge

Product Description

The Peeltex Rouge is a peel ply in Nylon (Polyamide fibers PA66)
The Peeltex Rouge is used during the implementation of the vacuum process ( infusion,pre preg)
It can also be used on Hand lay up.

More Info

Peeltex Vert Fluo

Product Description

The Peeltex Vert is a peel ply in Nylon (Polyamide fibers PA66)
The Peeltex Vert is used during the implementation of the vacuum process ( infusion, prepreg)
It can also be used on Hand lay up.

More Info

© Copyright 2014 Sicomin Epoxy Systems