OTHERS

RELEASE AGENTS

For compression molding, casting and vacuum bagging, Sicomin’s range of release agents answer all your requirements for demolding composite parts according to the following parameters:Nature of resin (epoxy, polyester, paints with solvents), Application temperature molding frequency, shine and ease of application and polishing.

Cirex PV6

Product Description

  • Sprayable sealer creates a surface film for one off release
  • Ideal to seal a pattern made from porous material such as Wood.

Cirex Si 111

Product Description

  • Thixotropic paste release agent.
  • Ideal for technical flanges on RTM toolings or porous substrates.

Cirex Si 112

Product Description

  • Versatile yellow wax for use upto 50°C.
  • Avoids fish eyes and other visual defects.

Cirex FK 1000 P

Product Description

  • Wax for high temperature application, epoxy, polyester, vinylester resins upto 200°C.
  • High gloss.

Cirex Si 022

Product Description

  • Sealer for semi-permanent release agent.
  • Avoids build up in mould.

Cirex Si 023

Product Description

  • Concentred sealer for semi-permanent release agent.
  • Avoids build up in mould.
  • Good resistance when walking in the mould.

Cirex Si Bouchpor W1

Product Description

Warerbased sealer for Si 041 WB

Cirex Si 040 WB

Product Description

  • Waterbased release agent for epoxy, polyester and vinylester resins upto 250 °C.
  • Avoids fish eyes and other visual defects.

Cirex Si 041 WB

Aerospace & Rail

Product Description

  • Universal water based release agent for all kind of polymers to 420°C.
  • Compatible with sealer Bouche-Pores W1.

Cirex Si 042

Product Description

  • Semi-permanent release agent for epoxy, polyester and vinylester.
  • High gloss.
  • Release upto 390°C.
  • Very efficient on all type of substrates
  • Compatible with sealer Si 022 and Si 023.

Cirex Si 043

Product Description

  • Concentrated semi-permanent release agent for epoxy, polyester, vinylester and phenolic resins.
  • Sliding effect, excellent for mould with a big draw and low taper.
  • Very efficient on metallic moulds.

Cirex Si 60

Product Description

  • White viscous semi-permanent release agent for epoxy, polyester and vinylester upto 180°C.
  • Compatible with Cirex Si 023.
  • Avoids fish eyes, other visual defects and pre-release.
  • Suitable also for wax.

Cirex Si 65

Product Description

  • Semi-permanent release agent for epoxy, polyester and vinylester resin upto 180°C.
  • Easy to polish.
  • Compatible with Cirex Si 023.
  • Avoids fish eyes, other visual defects and pre-release.

Cirex Si 66

Product Description

  • Semi-permanent release agent for epoxy, polyester and vinylester resin.
  • till 180°C.
  • Easy to polish.
  • Compatible with Cirex Si 023,
  • avoid fish eyes and pre-release

Cirex Si 68

Product Description

  • Permits the release of solvented product (Epoxy & Polyurethanne paints).
  • Liquid, use upto 120°C
  • Compatible with Cirex Si 023 and traditional wax.

Cirex SI 73

Product Description

  • Water based release agent, ideal for filament winding.
  • Release of epoxy, polyester and phenolic upto  200°C

Cirex Si 019

Product Description

  • Mould cleaner, use before application of new release agent.

© Copyright 2014 Sicomin Epoxy Systems