Sicomin - Composites, resin, epoxy systems, fiberglass, carbon, kevlar, paint, gelcoat


Company \| News \| Commercial network \| Contact us
PRODUCTS Search Glossary Site map Your basket
Epoxy Systems Laminating Pre-preg application Injection Filled epoxy system for filled-joint and structural assembling Impregnation epoxy systems (cracks in marble, porous materials) Clear Laminating Self-Extinguishing Bonding Fuel Tanks Wood Solvent free coating Foaming 170 to 600 Kg / m3 Flexibles Accelerators Casting Coatings Under water and wet surfaces applications Gelcoat Multiaxial fabrics E Glass Carbon Aramid / E Glass Woven fabrics Felts Polyester Verrane Glass Carbon Carbon / Aramid Aramid Unidirectional fabrics E Glass Carbon Woven carbon UD Miscellaneous Fillers Vacuum Epoxy Dispensing Machine Release agents Omega System Tools and accessories Accessories for kite board manufacturing Core Crosslink PVC foams Linear PVC Foam PEI Foam PU Foam Balsa Paints Visit web site MAPYACHTING Products list Catalogue 2009 Procedure for Kiteboard

Epoxy Systems Injection

Very low viscosity, specifically developped for resin transfer moulding techniques.

Applications :
- Industry
- Marine
- Energy
- Transport
- Sports and Leasure
- ...

SR 1720

Infusion epoxy system with low viscosity and very high temperature resistance up to 200°C Show/Hide the details of the product The SR 1720 / SD 7840 is a two cpomponent epoxy system infusable at average temperature (30-35 °C). It allows to get some composite parts able to stand very high temperatures (up to 200°C). This system Has been specially formulated for tooling applications in aeronautics and other industries... Mains characteristics : - Good wettability of the reinforcements - Excellent thermal and chemical resistance - High mechanical performances - Parts can be unmoulded after a 50 °C post cure - Formulated without any toxic products

SR 1710 Injection

Very high performance Infusion System. Show/Hide the details of the product Two part epoxy system Specifically developed for Resin Transfer Moulding (infusion / injection). Low viscosity Long working time (for the production of large parts) Very high mechanical performances. Very high chemical resistance. Temperature resistance: Tg 1 maximum > 100 °C .

SR 8100

High performance cost effective Infusion System. Show/Hide the details of the product Two part epoxy system Specifically developed for low pressure Resin Transfer Moulding (infusion / injection). Very low viscosity. Several hardeners High mechanical performances. Temperature resistance: Tg 1 maximum > 80°C .

SICOMIN : B.P. 23 - 40 Avenue de la Lardière - 13161 CHATEAUNEUF-LES-MARTIGUES - FRANCE, Tel : +33 (0)4 42 42 30 20 - Fax : +33 (0)4 42 81 29 29 - E-mail : sicomin.sud@sicomin.com

Back to the home page General sale conditions